T-Lace Tipping Machine
AM 71 - T - Lace

The semi-automatic 

T - Lace Tipping machine
Type: AM 71 -T - Lace

is identical to our semi-automatic Shoe-lace Tipping Machine AM 71,
but includes the complete equipment to manufacture T-Laces.

Production:         up to 3.000 laces per hour
Guarantee:          2 years
Tipping:            exchangeable die-boxes
Length of Laces:    from 8 cm to endless length
Weight:             400 KG

Country of Origine: Germany

On the semi-automatic shoe-lace tipping machine AM 71 - T - Lace
all kinds of shoe-laces
can be tipped:
round laces as well as flat laces, cotton as well as synthetics.

semi-automatic T - Lace Tipping Machine AM 71 - T - Lace

produces T - Laces for paper-hand-bags.

The T - Lace
is manufactured with the use of     T - Tape

The mechanic T -Tape Transport
Our machine works with a mechanic T-Tape transport instead of a sensor with servo-motor.
By this way we are able to bring the T-Tape always into the right position to be cut, and this also at high
quantities and high production speed. This is a very big advantage of our machine.

On the machine AM 71 all kinds of shoe-laces could be manufactured: 
round and flat ones, made of cotton and synthetics 

Semi  - Automatic
Shoe-Lace Tipping Machine AM 71

Two Years Garantee:
The machine has a garantee of two years which points out the very high  quality of this machine.
All over the world shoe-lace manufacturer work with this machine. 

The Special Tipping - System of our  Machine AM 71: 
The Tipping of  shoe-laces is done always in the same way:
First the Acetate-Tape is cutted, then this is wrapped arround the lace,  pressed together and cut: Tape and Lace.

But there is a big difference:
Normaly semi-automatic machines work with a system, which is a unit of  three pieces: 
The die with forming and cutting part and a knife. This tipping - system has a big  disadvantage: 
The tape is wrapped around the lace while the die closes. 
But the fixed knife begins to cut from the first moment, much before the die  is realy closed.
This means that the lace is cut before the highest pressure to fix the tape at the lace is done.
Our system on the machine AM 71 works different, it works exactly like 
the fully-automatic machines work:
The die is a unit of four pieces. First the tape is cutted and wrapped arround the lace.
Then the two forming and the two cutting pieces of the die close up to  the highest point. Now there is the 
maximum preassure on tape and lace to be fixed. 
Only now and not earlier, the left pair of dies moves further forward and cuts lace and tape while holding 
the left and the right tipp still on highest preassure.

This kind of tipping is standard for all fully-automatic machines. 
But only our semi-automatic machine AM 71 works with the same system.

Lenght of Laces: 
The machine AM 71 is able to manufacture laces from a length of 6 cm to unlimited.
Exchangeable Die - Boxes:
The tipping of shoe-laces is done by dies, which wrap the foil arround the lace, press together both (lace and tape) under high pressure and cut. According to the thickness of the lace, different sizes of dies 
are needed. The exchange of dies in the die-box, which is always necessary if you change form thinn laces to thick laces, will need approximate one hour. 

On our machine AM 71 the complete die-box can be echanged within 5 minutes.
You take off the die-box with the thinn die and replace the die-box with the thick die: this will take five minutes max.
This is not only a big win of time, which always means less costs. It is always a big advantage to protect the dies. Each exchange of dies must be done very carefully so that the dies will not damaged.

Next Page: Fully-automatic 
                    Shoe-Lace Tipping Machine
                    for synthetic laces